產品資訊

Specifications:

Electrical Properties : Typical Values Test Procedures / Method
Surface Resistivity(表面阻抗):
Outer Surface(外層表面) ≦1012  ohms/sq EOS/ESD-S11.11-2001
Metallic Layer(金屬層) 100 ohms/sq EOS/ESD-S11.11-2001
Inner Surface(裡層) ≦1012 ohms/sq EOS/ESD-S11.11-2001
Charge Decay(靜電消散) Less than 0.03 second FTMS-101C Method 4046.1

 

Physical Properties : Typical Values Test Procedures / Method
Bag Thickness(抗靜電鋁箔袋厚度)：    
Polyester Layer(聚脂膜) 12 Mic ASTM D-2103
AL Layer(鋁箔層) 6 Mic ASTM D-2103
Nylon Layer (尼龍膜層) 15 Mic ASTM D-2103
Polyethylene Layer(聚乙稀膜) 110 Mic ASTM D-2103
Total Thickness(總厚度) 150 Mic ASTM D-2103
Tensile Strength-TD(拉力強度-縱向) 437 kgf/cm2 ASTM D882
Tensile Strength-MD(拉力強度-橫向) 364 kgf/cm2 ASTM D882
Puncture Strength(穿刺強度) 13 kgf FTMS 101C Method 2065.1
Tear Strength-TD(撕裂強度-縱向) 3.52 kgf ASTM D1004
Tear Strength-MD(撕裂強度-橫向) 3.72 kgf ASTM D1004
Oxygen transmission(透氧度) ≤0.43 cc/m2.day ASTM D3985
Water Vapor transmission(透濕度) ≤0.01 g/m2.day ASTM F1249
Elongation-TD(延伸率-縱向) 59.60 % ASTM D882
Elongation-MD(延伸率-橫向) 66.60 % ASTM D882
ESD Shielding(靜電遮蔽) <10nJ   ANSI/ESD STM11.31-2006
Heat Sealing Conditions(熱封條件)：    
Temperature(溫度) 108 ℃~220℃  
Time(時間) 0.5~3.5 seconds  
Pressure(壓力) 30~70 PSI  

請左右滑動表格，可查看更多欄位。

　　　Item　　　 　CAS NO.　 　　Test Method　　 Test Results Detected Limit 　Unit　　
Fluorine(F) 007782-41-4 Analysis was performed by IC N.D. 50 ppm(mg/kg)
Potassium(K+) 024203-36-9 Analysis was performed by IC N.D. 0.001 ug/cm2
Ammonium(NH4+) 014798-03-9 Analysis was performed by IC 0.002 0.001 ug/cm2
Phosphate(Po43-) --- Analysis was performed by IC 0.002 0.001 ug/cm2
Chromiun(Cr) 007440-47-3 Analysis was performed by ICP-MS N.D. 0.001 ug/cm2

如需最新半成品、成品庫存明細、測試資料，或產品規格資料，請洽業務承辦人員。

相關商品