DD150 ESD Moisture Barrier Bag
2023-12-18
MD85 ESD Shielding Bag
2023-12-22
DD200 ESD Moisture Barrier Bag
Product Description：
DD200 ESD Moisture Barrier Bag is laminated by combining polyester film, aluminum foil, nylon film and low density polyethylene film, and finished up with surface antistatic processing. After being vacuumed, the DD200 is more resistant to damage by external force, it effectively isolates static electricity and moisture, and provides full protection for your products.
This product is applicable to semiconductor, electronic chip, optic components, LCD, and all electronic components that are sensitive to static electricity and moisture.
Specifications:
| Electrical Properties : | Typical Values | Test Procedures / Method |
| Surface Resistivity： | ||
| Outer Surface | <1012 ohms/sq | EOS/ESD-S11.11-2001 |
| Metallic Layer | 100 ohms/sq | EOS/ESD-S11.11-2001 |
| Inner Surface | <1012 ohms/sq | EOS/ESD-S11.11-2001 |
| Charge Decay | Less than 0.03 second | FTMS-101C Method 4046.1 |
| Physical Properties : | Typical Values | Test Procedures / Method |
| Bag Thickness： | ||
| Polyester Layer | 23 Mic | ASTM D-2103 |
| AL Layer | 6 Mic | ASTM D-2103 |
| Nylon Layer | 15 Mic | ASTM D-2103 |
| Polyethylene Layer | 150 Mic | ASTM D-2103 |
| Total Thickness | 200 Mic | ASTM D-2103 |
| Puncture Strength | 17.2 kgf | FTMS 101C Method 2065.1 |
| Water Vapor transmission | <0.0001 g/in2.day |
ASTM E96 |
| Heat Sealing Conditions | ||
| Temperature | 108 ℃~220℃ | |
| Time | 0.5~3.5 seconds | |
| Pressure | 30~70 PSI |
請左右滑動表格，可查看更多欄位。
| Item | CAS NO. | Test Method | Test Results | Detected Limit | Unit |
|---|---|---|---|---|---|
| Fluorine(F) | 007782-41-4 | Analysis was performed by IC | N.D. | 50 | ppm(mg/kg) |
| Potassium(K+) | 024203-36-9 | Analysis was performed by IC | N.D. | 0.001 | ug/cm2 |
| Ammonium(NH4+) | 014798-03-9 | Analysis was performed by IC | 0.002 | 0.001 | ug/cm2 |
| Phosphate(Po43-) | --- | Analysis was performed by IC | 0.002 | 0.001 | ug/cm2 |
| Chromiun(Cr) | 007440-47-3 | Analysis was performed by ICP-MS | N.D. | 0.001 | ug/cm2 |
We provide customized laminating material for a variety of product requirements (minimum ordering quantity required). If the latest test data are needed, please contact our sales. We will provide the latest inventory and product specification that matches your needs.
